7 Commissioning
SMA Solar Technology America LLC
Installation ManualSTP50-US-40-IA-en_es-1146
7.5 Selecting a configuration option
After you have logged onto the user interface as Installer, the Configuring the Inverter page
opens.
Figure 11: Layout of the Configuring the Inverter page
Position Designation Description
A Device information Provides the following information:
• Device name
• Inverter serial number
• Inverter firmware version
B User information Provides brief information on the listed configuration
options
C Skip configuration Offers the option of skipping the inverter configura-
tion and go directly to the user interface (not recom-
mended)
D Checkbox Allows you to choose not to have the displayed page
displayed again when the user interface is called up
again
E Configuration options Provides a selection of the various configuration op-
tions
Procedure:
On the Configuring the Inverter page, different configuration options are available to choose
from. Select one of the options and proceed for the selected option as described below. SMA
recommends carrying out the configuration with the installation assistant. This way, you ensure that
all relevant parameters are set for optimal inverter operation.
• Adoption of configuration from a file
ENGLISH
To Next Page
Loading...
