9 Decommissioning the Inverter
SMA Solar Technology America LLC
Installation Manual STP50-US-40-IA-en_es-11 55
• Place the inverter with padding on the pallet. For this purpose, put the AC connection unit
side of the inverter on top of the padding.
• Remove all four transport handles from the taps. If necessary, insert a screwdriver into the
holes on the transport handle and use the screwdriver to remove the transport handle.
• Pull the upper part of the original packaging over the inverter.
• Insert the upper padding.
• Close the packaging.
• Secure the packaging and pallet with strapping or with fastening belts.
19. Dispose of the inverter in accordance with the locally applicable disposal regulations for
electronic waste.
ENGLISH
To Next Page
Loading...
