4 Using the Inverter User Interface
SMA Solar Technology America LLC
User Manual STP50-US-40-BA-en-10 23
4. In the Repeat password field, enter the new password again.
5. Select Login.
☑ The Configuring the Inverter page opens.
Log in as the User or Installer
1. In the drop-down list Language, select the desired language.
2. In the User group drop-down list, select the entry Installer or User.
3. Enter the password in the field Password.
4. Select Login.
☑ The start page of the user interface opens.
Log Out as the User or Installer
1. On the right-hand side of the menu bar, select the menu User Settings.
2. In the subsequent context menu, select [Logout].
☑ The login page of the user interface opens. The logout was successful.
To Next Page
Loading...
