SMA SUNNY TRIPOWER CORE1-US - Changing User Passwords

4 Using the Inverter User Interface
SMA Solar Technology America LLC
User Manual STP50-US-40-BA-en-10 29
Procedure:
1. Activate the user interface (see Section4.1, page19).
2. Log into the user interface (see Section4.2, page22).
3. Select the menu Data.
4. Select the folder Data.
5. To call up the data, select the respective folder and click on the required file.
6. To download the data, select the data type to be exported in the drop-down list. Then apply
the time filter and select Data export.
4.6 Changing the Password
The password for the inverter can be changed for both user groups. Furthermore, the user group
Installer can change the password for the user group User as well as its own password.
PV systems registered in a communication product
With PV systems that are registered in a communication product (e.g. SunnyPortal,
ClusterController), you can also assign a new password for the user group Installer via the
communication product. The password for the user group Installer is also the system
password. If you assign a password for the user group Installer via the user interface of the
inverter that does not correspond to the system password in the communication product, the
inverter can no longer be reached by the communication product.
• Ensure that the password for the user group Installer is the same as the system password
in the communication product.
Procedure:
1. Activate the user interface (see Section4.1, page19).
2. Log into the user interface (see Section4.2, page22).
3. Call up the menu Device Parameters.
4. Select [Edit parameters].
5. In the parameter group User Rights > Access Control change the password of the desired
user group.
6. Select [Save all] to save the changes.