SMA SWR 2500U - V1.2 - Page 10

Sunny Boy 2500U Installation and Operator’s Manual
SB2500U-11:NE - 10 - SMA Regelsysteme GmbH
The Sunny Boy inverter is mounted on the back side with the three metal straps.
Total height of the Sunny Boy: 295.50 mm
=
=
Total width of the Sunny Boy: 434.50 mm
+
+
+
Drilling Template for the Sunny Boy 2000, 2500, 3000
63,50 mm
position of the holes on the top
(for 6 mm screws)
bottom hole
(6 mm diam.)
distance between the holes on the top 217.50 mm
top
Please note:
mount the Sunny Boy
tilted to the back or
vertical!
Never mount the
Sunny Boy tilted
to the front!
vertical distance between the holes: 220.50 mm
Fig. 2.2: Picture of drilling template - original template in appendix