SMA Solar Technology AG Electrical Connection
Installation Manual WB33-38-IA-IEN120940 27
14. Screw the pressure screw (E) tightly onto the threaded sleeve (C). The pressure screw acts as a
seal and to relieve strain.
☑ The AC connection socket is now assembled.
15. Close the bush insert with the protective cap provided if the inverter is not to be connected
immediately.
16. Insert the AC connection socket into the AC socket
on the inverter. If necessary, remove the protective
cap beforehand.
☑ The AC cable is now connected to the inverter.
To Next Page
Loading...
