smarttech.com/kb/171415 3
Important information
Note
Refer to the
SMARTBoard 6000S and 6000S Pro series interactive displays installation and
maintenance guide
(smarttech.com/kb/171414) for important information about installing and
maintaining the display.
Warning
l
Do not open or disassemble the display. You risk electrical shock from the high voltage inside the
casing. Opening the casing also voids the warranty.
l
Do not stand (or allow children to stand) on a chair to touch the surface of the display.
l
To reduce the risk of fire or electric shock, do not expose the display to rain or moisture.
l
Do not insert objects inside the cabinet ventilation holes, because they could touch dangerous
voltage points and cause electric shock, fire or product damage which may not be covered by
the warranty.
l
Do not place heavy objects on the power cable. Damage to the cable could cause shock, fire, or
product damage which may not be covered by the warranty.
l
If the glass is broken, do not touch the liquid crystal. To prevent injury, handle glass fragments
with care when disposing of them.
l
Disconnect the display’s power cable from the wall outlet and seek assistance from qualified
service personnel if any of the following occur:
o
The power cable or plug is damaged
o
Liquid is spilled into the display
o
Objects fall into the display
o
The display is dropped
o
Structural damage, such as cracking, occurs
o
The display behaves unexpectedly when you follow operating instructions
To Next Page
Loading...
Need help?
General
