Smart Dedicated Design STR7202 - Page 27

Installation Manual STR7202 TAG4 & SFM7704 TAG1
DBCI-0512-0052-V013
STR7202 2-Side Trimmer & SFM7704 Square Fold Module
Name: RI01
Date: 29-3-2017
Page: 27 / 72
5. Installation (continued)
Contents
5.1 Mechanical Installation (continued)
5.1.1 STR behind Canon Booklet Trimmer F1 (continued)
Fig. 5.1.1.9
Fig. 5.1.1.10 Fig. 5.1.1.11
Step
Action
Remarks
7.
Set the STR parallel to the
Canon Booklet Trimmer.
Make sure that the STR is parallel to the Canon Booklet
Trimmer. If necessary, adjust the STR by turning nuts (E)
on the outfeed side wheels of the STR (Fig. 5.1.1.10 &
5.1.1.11).
8.
Fix Height.
Tighten the Upper nuts [D] (Fig. 5.1.1.10 & 5.1.1.11) to fix
height.
E
D