XII. SPECIFICATIONS
Main characteristics of the device and ranges of measured values
Measurement error less than 1%
Single phase current measurement up to 100А /300А / 600А /
1000А / 1500А / 2000А
Load on controlled relay up to 50 Wt
Power consumption up to 1.2 Wt
Wireless communication protocol 2.4 GHz / IEEE 802.11 (b, g, n)
Data refresh interval
5 sec
Data collection interval 1 minute
Data accumulation in the absence of WiFi 17 days
Working temperature range from -40 °C to 70 °C
Dimensions LxHxW 90 х 67 х 52 mm
XIII. ACCESS TO DATA. VISUALIZATION
The data obtained during the measurements can be stored on a
cloud server. Access to the cloud server, current and historical data
can be obtained from your personal account in the universal WEB-
application smart-MAIC Dashboard.
1. Create your account on the "cloud server", for this follow the link
https://dash.smart-maic.com/. Follow the steps to register.
2. From the Devices menu, select Add Device and enter the
following information:
• Device name - arbitrary name of your device
• Device ID - the ID of your device can be viewed on the WEB
interface of the device in the "Status" tab
• Password - the password that you have set on your device.
After connecting a new device, you will be prompted to
automatically create two pre-configured whiteboards to display
data on your PC and mobile device.
For more information, see the Knowledge Base
support.smart-maic.com
USER MANUAL
14
The scope of delivery must comply with the following table
№
Name Qty.
1 Energy monitor smart-MAIC 103 1
2 Current transformers 3
XI. CONTENTS OF DELIVERY
To Next Page
Loading...
Need help?
General