X
To set the desired value: press the =
or ; button to decrease or increase
the value.
X
To confirm the value and exit the menu:
press the 9 or % or u button.
Adjusting the balance
X
Press the u button.
X
Press the : button repeatedly until
Balance is selected.
X
To set the desired value: press the =
or ; button to decrease or increase
the value.
X
To confirm the value and exit the menu:
press the 9 or % or u button.
System settings
General information
You can make the systems settings in the
system menu.
Brightness
Setting the display brightness:
X
Press the i button.
The system menu appears.
System menu
X
Press the : or = button to select
Settings and press 9 to confirm.
The top menu item Brightness is selec-
ted by default.
Brightness menu item selected
X
Press 9 to confirm.
Adjusting the brightness
X
Press the = or ; button to darken
or brighten the display.
X
Press 9 or % to confirm and exit the
menu.
i
The display brightness can be set dif-
ferently for daytime and nighttime oper-
ation. When the lights are switched off,
the daytime operation settings are used
and when the lights are switched on, the
nighttime operation settings are used.
In nighttime operation, the brightness
can be reduced using the dimmer switch
on the instrument cluster (see vehicle
Owner's Manual).
Restoring the factory settings
X
Press the i button.
The system menu appears.
10
Basic functions
>> At a glance.
To Next Page
Loading...
Need help?
General
