Manual frequency entry
X
Press the 9 or : button to set a
higher or lower value for the first digit.
X
To set the values of the following digits:
press the ; button to select the digit.
X
Press the 9 or : button to set a
higher or lower value for the selected
digit.
X
Press the % button to exit the menu.
Selecting stations via the station pre-
sets
X
Select the desired preset group (FM1,
FM2, MW, SW or LW).
X
Press one of the station presets 4 –
3.
The radio selects the station stored
under the selected preset.
Storing stations
General information
Each preset group (FM1, FM2, MW, SW and LW)
provides six presets.
The following options allow you to store a
station:
R
manually, using the station presets (all
preset groups)
R
automatically, using the Autostore func-
tion
Storing stations using the station pre-
sets
X
Setting the desired preset group FM 1,
FM 2, MW, SW or LW.
X
Selecting a station
X
Press and hold the desired station pre-
set, e.g. ?, until you hear a tone.
The currently set station is stored under
preset ? in the preset group selected.
Storing stations using the Autostore
function
i
The Autostore function automatically
assigns receivable stations to the pre-
sets in the preset groups FM1, FM 2, ... in
an order corresponding to the quality of
reception. Any stations stored manually
in these presets will be lost.
X
Select the desired preset group.
X
Press the : button to select Presets
and press 9 to confirm.
The display shows the assignment of the
six presets as well as the Autostore
menu item.
X
Press the 9 or : button to select
Autostore and press 9 to confirm.
The six stations with the best reception
are saved to the six available memory
positions.
i
If the process is interrupted by a traf-
fic announcement, you must repeat it.
Radio mode
15
>> Audio.
To Next Page
Loading...
