SMART Automobile - Basic Functions of the Audio System

Function Page
D
Station presets 15
E
i button
Calls up the system menu
10
Function Page
F
Õ button
Activates USB/AUX mode 16
G
$ button
Switches on radio mode 14
Display
The display shows all the information con-
cerning settings, stations, current track
time etc.
Depending on the audio source, this infor-
mation may differ. Details can be found in
the individual sections.
Example: radio operation
:
TP = traffic announcements are availa-
ble on the selected station
TA = the traffic announcement function
is active.
;
FM waveband and station frequency
=
Mute
?
Station name
A
Radio mode is activated. Depending on
the waveband and the preset group
selected, the display shows either FM 1,
FM 2, MW, SW or LW.
B
Info menu
C
Presets menu
D
Radio menu
E
Preset position of the selected station
i
If no station name is available, the fre-
quency is shown in the centre of the dis-
play.
Example: USB mode
:
TP = traffic announcements are availa-
ble on the selected station
TA = the traffic announcement function
is active. During a traffic announce-
ment, the radio switches from USB mode
to radio mode and back again.
;
USB: random track sequence within a
storage medium
=
Track time
?
Track name
A
Media menu
B
Info menu
C
Music menu
D
USB menu
E
Track number
i
The track number refers to the folder in
which the MP3 file is saved.
Basic functions
This section provides information about
the basic functions of audio system basic.
Further information about the functions
can be found in the respective sections
(Y page 14) and (Y page 16).
Basic functions
7
>> At a glance.