SMART For two coupe - Armrest; Seats; Passenger Seat

X
Release adjustment lever : when the
desired seat backrest tilt is reached.
When you hear an audible click, the seat
backrest is again fixed into place.
X
Check for proper engagement before
driving.
i
When adjusting the tilt of the backrest
without any load on the seat then hold on
to the backrest with one hand.
Seat fore and aft adjustment
X
Pull adjustment handle ; upwards and
slide the seat to a seating position that
still allows you to reach the accelerator/
brake pedal safely.
X
Release adjustment handle ; when the
desired seating position is reached.
When you hear an audible click, the seat
is again fixed into place.
X
Check for proper engagement before
driving.
Seat height
The seat guide is inclined in the horizon-
tal plane. Seat fore and aft adjustment also
alters the seat height.
Armrest* on driver’s seat
Folding up and down
X
Folding up: Hold front of armrest and fold
it up in direction of arrow :.
X
Folding down: Hold front of armrest and
fold it down in direction of arrow ;.
Adjusting armrest angle
You can adjust the angle of the armrest when
it is folded down.
X
Turn thumb wheel =.
R
Direction of arrow ?: down
R
Direction of arrow A: up
Passenger seat
You can expand the cargo compartment by
folding down the passenger seat.
Observe the loading instructions
(Y page 108).
Folding down
X
Remove the seat belt from seat belt
guide :.
X
Move the passenger seat backward as far
as it will go.
Seats
59
>> Controls.
* optional
Z