SMART LightRaise SLR60wi - Adjusting Interactive Projector Settings; SLR60 wi Projector Settings

A P P E N D I X C
Adjusting the interactive projector settings
97 smarttech.com/kb/170295
Appendix C: Adjusting the interactive
projector settings
Adjusting SLR60wi interactive projector settings 97
Adjusting SLR60wi2 interactive projector settings 107
The remote control's Menu button enables you to access the on-screen display to adjust the projector
settings.
I M P O R T A N T
There are no projector menu options on the XCP. Keep your remote control in a safe place because
the XCP is not a substitute for the remote control.
Adjusting SLR60wi interactive projector settings
The remote control’s Menu button enables you to access the on-screen display (OSD) menu to adjust
the projector settings.
I M P O R T A N T
There are no projector menu options on the XCP. Keep your remote control in a safe place, such as
the pen holder, because the XCP is not a substitute for the remote control.
N O T E
Some projector settings aren’t available for all video sources.
Setting Use Notes
Image Adjustment menu
Display Mode Indicates the interactive projector’s
display output (BrightClassroom,
DarkClassroom, sRGB White,
Wall Color,
SMARTPresentation and User).
The default is Bright
Classroom.