iii smarttech.com/kb/170295
Contents
Important information i
Touch detection module (TDM) ii
Chapter 1: About your projector 1
Features 2
Optional accessories 6
Chapter 2: Installing your projector 7
Choosing a surface 7
Choosing a location 11
Choosing a height 12
Routing the cables 14
Projector connections 16
Installing DisplayLink drivers for the XCP 19
Installing SMARTNotebook software 20
Installing SMARTMeetingPro software 20
Aligning the projector 20
Chapter 3: Using your projector 23
How your projector works 23
Interacting with your computer 24
Using the remote control 24
Focusing the image 25
Adjusting the image 26
Using your interactive pen 26
Chapter 4: Using the XCP 31
Connecting the XCP to the projector 32
Connecting the XCP adapters to the XCP 35
XCP input connections 36
Using the XCP projector controls 37
Using the SMARTGoWire cable with the XCP 38
Chapter 5: Using the SMARTGoWire cable 39
Connecting the SMARTGoWire cable to the projector 39
Connecting the SMARTGoWire cable to the XCP 40
Chapter 6: Maintaining your projector 45
Replacing the remote control battery 45