Need help?Do you have a question about the SMART UF55 and is the answer not in the manual?
General| Display Technology | DLP |
|---|---|
| Lamp Life | 3000 hours (Standard), 4000 hours (Economy) |
| Brightness | 2000 lumens |
| Contrast Ratio | 2000:1 |
| Input Ports | HDMI, VGA, USB |
| Output Ports | VGA Out |
| Noise Level | 32 dB (Eco mode) |
Provides essential safety warnings and guidelines for using the projector.
Details the projector's DLP technology, resolution, aspect ratio, and throw ratio.
Lists all items included in the projector package for completeness check.
Identifies and labels the main unit components and indicators.
Details all available input and output connectors on the projector.
Explains the functions of each button on the remote control.
Step-by-step guide on connecting power and input cables, managing them.
Instructions for powering on the projector and putting it into idle mode.
Guidance on adjusting the projector's focus for a clear image.
How to navigate and use the projector's OSD menus for settings.
Details on adjusting brightness, contrast, and other image parameters.
Instructions for managing volume, mute, and closed captioning.
Information on restoring factory defaults and managing auto settings.
Configuring DHCP, IP addresses, gateway, and other network parameters.
How to select the OSD language for the projector.
Displays status details like lamp hours, firmware, and serial number.
How to remotely manage the projector via a web browser.
Provides solutions for common image and other projector problems.
Lists supported VGA, Y/Pb/Pr, S-Video, and Composite video modes.
Details the pin configuration for the RS-232 serial port.
Step-by-step guide on how to safely clean the projector lens.
To Next Page
