SMART LightRaise 60wi User Manual

LightRaise™ 60wi
interactive projector
User’s guide
Scan the following QR code to read this guide on your smart phone or
other mobile device or go to:
onlinehelp.smarttech.com/english/mobile/projectors/60wi/index.htm

SMART LightRaise 60wi Specifications

General

Display Technology	DLP
Native Resolution	WXGA (1280 x 800)
Brightness	3000 lumens
Throw Ratio	0.36:1
Interactive Technology	Infrared
Lamp Life	4000 hours (eco mode)
Multi-user Support	Yes, up to four users
Inputs	HDMI, VGA, USB
Contrast Ratio	3000:1 (typical)
Projection Size	77" to 100" diagonal

Summary

Important Information

Safety and Handling Warnings

Crucial warnings for safe operation, installation, and handling of the projector and its components.

Chapter 2 Installing your interactive projector

Installation Site Selection

Software Installation and Alignment

Procedure for installing necessary software and calibrating touch input.

Chapter 3 Using your interactive projector

Remote Control and Settings Adjustment

Image Focus and Pen Usage

Chapter 4 Using the XCP

XCP Connectivity and Controls

Chapter 7 Troubleshooting your interactive projector

Status Determination

Connectivity and Touch Issues

Steps to troubleshoot connection, pen, and finger touch accuracy issues.

Image and Projector Errors

Resolving image display problems and projector error messages.

Chapter 8 Remotely managing your interactive projector

Web Management Access and Home

Projector Settings Management

Chapter 9 Connecting your room control system to your interactive projector

Serial Interface Configuration

Details the RS232 serial interface and required communication settings.

Command Control and System Settings

Commands for integrating room control systems, managing projector functions, and settings.