Chapter 5
41 smarttech.com/kb/170295
Chapter 5: Integrating other devices
Native video format 41
Video format compatibility 41
HD and SD signal format compatibility 43
Connecting peripheral sources and outputs 44
This chapter provides information on integrating your LightRaise60wi interactive projector with
peripheral devices.
N O T E
The 16:9 on-screen display (OSD) menu setting delivers all video modes with black bands along
the top and bottom edges of the screen. The Match Input OSD setting might deliver video modes
with black bands along the top and bottom or the left and right edges of the screen, depending on
the input resolution.
Native video format
The following table lists the native VESA® RGB video format for the projector.
Resolution Aspect ratio Refresh rate (Hz)
1280 × 800 16:10 60
Video format compatibility
The following table lists the projector’s compatible VESA RGB video formats by resolution, which the
projector adjusts automatically when you use the aspect ratio commands described in Adjusting
projector settings on page 19.
To Next Page
Loading...
