C H A P T E R 3
Using your interactive projector
18 smarttech.com/kb/170295
Interacting with your computer
You interact with your computer by touching the surface with your finger. You can touch the screen to
open files, navigate folders and manipulate content. Each touch acts as a left-click.
Right-click by touching and holding your finger to the surface for about two seconds.
Using the remote control
The projector remote control enables you to access on-screen menus and change projector settings.
Use the Power button on the remote control to put the projector into Standby mode or to turn it on.
You can also use the Input button on the remote control to switch sources on the projector.
Number Function Description
1 Input Select a video and audio input source.
2 Menu Show or hide the projector menus.
3 (Left), (Right),
(Up) and (Down) arrows
Change the menu selections and adjustments.
4 Hide Freeze, hide or display the image:
l
Press once to freeze the image.
For example, you can display a question on
the screen while you check your e-mail.
l
Press again to hide the image and display a
black screen.
l
Press again to return to the live image.
To Next Page
Loading...
