SMART LightRaise 60wi - Adjusting Projector Settings

C H A P T E R 3
Using your interactive projector
19 smarttech.com/kb/170295
Number Function Description
5 Mode Select one of the following display modes:
l
SMART Presentation
l
Bright Room
l
Dark Room
l
sRGB
l
User
6 Mute Mute audio.
7
(Power)
Turn on the projector or put it into Standby mode.
8 (Enter) Accept the selected mode or option.
9 (Volume Up) Increase audio amplification volume.
10 (Volume Down) Decrease audio amplification volume.
Adjusting projector settings
The remote control’s Menu button enables you to access the on-screen display (OSD) menu to adjust
the projector settings.
I M P O R T A N T
There are no projector menu options on the XCP. Keep your remote control in a safe place, such as
the pen holder, because the XCP is not a substitute for the remote control.
N O T E
Some projector settings aren’t available for all video sources.
Setting Use Notes
Image Adjustment menu
Display Mode Indicates the projector’s display
output (BrightClassroom,
DarkClassroom, sRGB White,
Wall Color,
SMARTPresentation and User).
The default is Bright
Classroom.