SMART LightRaise 60wi - Software Installation and Alignment

C H A P T E R 2
Installing your interactive projector
16 smarttech.com/kb/170295
Installing SMARTNotebook software
Pen and finger touch will work with any computer connected to your interactive projector, but for
multitouch and full functionality, install SMARTNotebook software. You can install the software from
the DVD that came with your interactive projector and you can visit smarttech.com/software to
download software updates.
To install SMART software
Insert the SMART software DVD that came with your interactive projector, and then follow the
on-screen instructions.
Aligning the interactive projector
After you install SMARTNotebook software, you can perform the alignment procedure. This
procedure must be completed before you can use the interactive projector.
To align the interactive projector
1.
Click the SMART Board icon in the Windows® notification area or the Mac Menu bar, and
then select SMART Settings.
The SMARTSettings window appears.
o
If your interactive projector is connected to your computer and working, the following text
appears: The SMARTBoard interactive whiteboard is working properly.
o
If your interactive projector isn’t connected to your computer, the following text appears: No
SMARTBoards are connected.
2. Select Connection Wizard.
3. Select LightRaise 60wi interactive projector from the SMART products found drop-down
list, and then click Next.
4. Select Product is being set up for the first time, and then click Next.
5. Follow the on-screen instructions.
I M P O R T A N T
See Chapter 4 of the SLR 60wi installation guide (smarttech.com/kb/170259) for more
information about aligning your system.