SMART LightRaise 60wi - Chapter 8 Remotely managing your interactive projector; Web Management Access and Home

Chapter 8
73 smarttech.com/kb/170295
Chapter 8: Remotely managing your
interactive projector
Accessing web page management 73
Home 74
Control panel 74
Network settings 75
E-mail alerts 77
Password settings 77
Simple Network Management Protocol (SNMP) 78
This chapter describes how to manage your interactive projector from a remote location.
Accessing web page management
Before you can access the remote management web page, you must connect a network cable to your
projector and enable the network functions in the on-screen display (OSD) menu (see Adjusting
projector settings on page 19).
N O T E
You can view the projector’s IP address by accessing the projector’s Network Settings menu (see
Network settings on page 75).
To use the management web page
1. Start your Internet browser.
2. Type the projector’s network IP address in the address bar, and then press ENTER.
The LightRaise Projector Settings window appears.
3. Select the menu options in the left pane to access the settings on each page.
4. Modify settings using your computer’s mouse and keyboard, and then click Submit or another
action button next to each setting you change.