Chapter 2
7 smarttech.com/kb/170295
Chapter 2: Installing your interactive
projector
Choosing a surface 7
Choosing a wall surface 8
Choosing a dry-erase board surface 8
Surface obstructions 10
Choosing a location 11
Choosing a height 12
Routing the cables 13
Projector connections 15
Installing SMARTNotebook software 16
Aligning the interactive projector 16
See the printed installation guide and mounting template that came with your LightRaise 60wi
interactive projector for information on installing your projector. You can access these documents by
visiting the LightRaise support page at smarttech.com/Support.
This chapter provides additional details to help you install your interactive projector.
Choosing a surface
Consider what your projection surface is when you’re selecting a location for your interactive
projector. You can install it so the image falls on an existing dry-erase board or a flat wall surface. A
dry-erase board is a flat surface that works well with your interactive projector and allows you to write
smoothly in digital ink.
To Next Page
Loading...
