C H A P T E R 1
About your interactive projector
2 smarttech.com/kb/170295
Features
Interactive projector
The features of your interactive projector include the following:
l A wall-mounted projection engine that uses DLP®
technology by TexasInstruments™, providing
BrilliantColor™ performance and quality Gamma 2.2
correction with Bright Room, Dark Room, sRGB, User
and SMART Presentation modes.
l Finger and pen touch interaction that enables you to tap,
swipe, gesture or draw with two fingers or the interactive
pens.
l Tool awareness that automatically differentiates between finger touch and pen touch on the
surface. You can write with a pen, and then manipulate content with your finger without changing
tools.
l Dual touch interaction that enables two people to draw and manipulate content on the surface at
the same time. The interactive surface can be touched simultaneously by two fingers, by two
pens or by one finger and one pen.
l 3D-ready projector using DLPLink™ technology
l HD ready, wide screen, 2500 lumens, maximum resolution supported 1080p
l NTSC, NTSC 4.43, PAL, PAL-N, PAL-M and SECAM video system compatibility
l WXGA 1280 × 800 native resolution
l 16:10 native aspect ratio with support for 4:3 and 16:9 ratios with scaling
l 3400:1 contrast ratio
l 100" (254.0 cm) diagonal maximum interactive area size on a blank, vertical wall
l 0.36:1 throw-ratio
l Two built-in 10W speakers
N O T E
For further details about projector features, see the LightRaise 60wi interactive projector
specifications (smarttech.com/kb/170335).
To Next Page
Loading...
