C H A P T E R 4
Using the XCP
38 smarttech.com/kb/170295
Using the XCPprojector controls
The following diagram and table describe the basic projector controls you can access from the XCP.
Number Control Function
1
Power button Tap the Power button to turn the projector on and off. The
button illuminates to indicate the projector status (see
Determining projector status on page 56).
2 Volume slider Tap, tap and hold, or swipe the Volume slider to increase and
decrease the volume. The slider brightens as you increase the
volume.
3 Volume mute Tap the Volume mute button to mute the audio from the built-in
projector speakers. The button turns amber when activated.
4 A/V mute Tap the A/V mute button to freeze the current image and mute
the audio presented by the projector. The button turns amber
when activated.
Tap the button a second time to display a blank screen.
Tap the button a third time to return the screen to normal.
To Next Page
Loading...
