Chapter 4 Using the remote control
smarttech.com/kb/171866 10
Chapter 4 Using the remote control
Use the infrared remote control to turn the web camera on or off, to open the on-screen menu, and
reposition the camera.
No. Name Procedure
1 Pause Enable or disable the camera. The camera goes into standby mode
when it’s paused - it does not turn off.
2 OK Press OK to reset the camera position.
3 Left and right
buttons
Press Left to pan the camera left.
Press Right pan the camera right.
Tip
You cannot pan when the camera is fully zoomed out.
4 Preset Save up to three camera positions.
See
Using the preset buttons
on the next page.
5 Zoom out Press to decrease the camera’s zoom.
6 Auto framing Turn on or off automatic framing. Automatic framing centers the
camera on meeting participants.
7 Menu
l
Press to open the on-screen menu.
l
If in the top level of the on-screen menu, press Menu to exit.
l
If in the on-screen menu, press Menu to return to the previous
menu.
8 Up and down
buttons
Press Up to tilt the camera up.
Press Down to tilt the camera down.
Tip
You cannot tilt when the camera is fully zoomed out.
9 Zoom in Press to increase the camera’s zoom.
To Next Page
Loading...