Chapter 4 Using the remote control
smarttech.com/kb/171866 11
Using the preset buttons
To save a preset
1. Set the camera’s pan, tilt, and zoom position.
2.
Press 1, 2, or 3 for 3 seconds to save the camera position. When you release the button, Set preset #
displays. If you hold the button too long, Clean preset # displays.
Note
You can save over a preset.
To recall a preset
Press 1, 2, or 3 for 1 second to recall a saved camera position.
To delete a preset
Press 1, 2, or 3 for 5 seconds to delete a saved camera position. Clean preset # displays
To Next Page
Loading...