smarttech.com/kb/171866 12
Chapter 5 Adjusting on-screen display
menu settings
Use the on-screen display (OSD) menu to adjust settings for your camera.
Note
Some video conferencing software mirrors the camera image on the screen, so the on-screen menu
will be reversed and difficult to read.
Changing settings in the on-screen display menu
1. Press on the remote control.
The on-screen display menu appears.
2.
Press the up and down arrows to highlight a menu, and then press OK to enter the menu.
3. Press the left and right arrows to change the menu option’s setting.
To return to the main menu, press on the remote control.
Setup
Option Values Function
(Auto Framing) On
Off
Sensitivity 0–2 Adjusts the sensitivity of Auto Framing. Only available when Auto
Framing is enabled.
Image style Default
Normal
Clarity
Bright
Soft
USB mode Bulk
ISOC
This feature is enabled once the camera is restarted.
To Next Page
Loading...