To Next Page

To Previous Page

HGM6110/6120 AUTO START MODULE

HGM6110/6120 Auto Start Module ISSUE 2.0 2008-10-27 Page 6 of 24

3. SPECIFICATION

Operating Voltage DC8. 0V to 35. 0V, Continuous Power Supply

Power Consumption <3W

Alternator Input Range

3-Phase 4 Wire

2-Phase 3 Wire

Single phase 2 wire

15V AC - 360 V AC (ph-N)

Alternator Input Frequency 50Hz - 60 Hz at rated engine speed

Magnetic Input Range +/- 0. 5 V to 70 V Peak

Magnetic Input Frequency 10,000 Hz (max) at rated engine speed.

Start Relay Output 7 Amp DC at supply voltage.

Fuel Relay Output 7 Amp DC at supply voltage.

Auxiliary Relay Output (1-4)

（1）7 Amp DC at supply voltage，（2）

7A 250VAC free

voltage contact，（3,4）16A 250VAC free voltage contact.

Dimensions 200mm x 144mm x 50mm

Panel cutout 184mm x 139mm

Operating Temperature Range -25 to +70°C

Storage Condition Temperature: (-30 - 80)°C

C. T. Burden 2. 5VA

C. T. Secondary 5A

Weight 0. 55kg

4. OPERATION

4.1 KEY FUNCTION

Stop/ Reset key

This button places the module into its Stop/reset mode.

When engine is running, pressing this key will stop the

engine. When a shutdown alarm occur, pressing this key will

reset alarm. In stop mode, pressing this key over 3 second

will test LED mounted on the panel.

Start key

In manual or manual test mode, pressing this key will start

engine.

Manual mode key Pressing this key will set the module into manual mode.

Auto key Pressing this key will set the module into automatic mode.

Smartgen HGM6120 User Manual

Questions and Answers: