Maintenance and servicing
Cleaning of filter belt
Instruction manual EBF / EBF ECO page 15 of 19
11/2014
Very good (our
recommendation)
The selected detergent shall be applied and allowed to have effect for at
least 15 minutes. The filter belt should be as dry as possible.
The water level in the bio-pond should lie below the filter stage (filter
belt).
The belt can cleaned with high pressure (max. 120 bar) of cold water with
a distance of more than 15 cm, but without any guarantee.
The use with a high-pressure cleaner is not guaranteed by the belt
manufacturer and can be carried out at own risk. However, we have
obtained some good results for it in extensive tests.
To Next Page
Loading...