The client is responsible for a safe installation of the G-versions on-site.
For pumping outputs above 40,000l/h, the installation of the option
‘‘Overflow protection’’ is mandatory. Without its installation, the
guarantee will be considered void.
The suction area of the pressure pumps must remain free in order to
avoid blockage or feeding of the pump through an air diffuser.
EBF 1200S
The float gauge shall not be positioned deeper than at its initial position
at the time of delivery.
The client would be considered responsible that the pond cannot be dried
out in case of a defect.
AquaFil GmbH draws attention to this danger and declines any liability in
the event of damage.
To Previous Page
Loading...