Read this first
Symbols and used terms
Instruction manual EBF / EBF ECO page 2 of 19
11/2014
Application of this
instruction manual
This instruction manual provides the installer of this plant, its owner and
the expert personnel with some important information regarding
installation and maintenance of the plant and general information
regarding its safe operation.
The described plant shall only be operated for its intended purpose of use
within the defined field of application. For filtration of special liquids and
any use in the industrial field, the manufacturer shall be consulted.
The Smartpond® continuous belt filters are generally intended for use in
cleaning and filtration of solids from liquids. Field of application includes
industries, fish farming, sewage treatment plants and fish and swimming
ponds.
If the plant is operated for a purpose beyond the field of application or if
it is modified, it would no longer be considered in use for the intended
purpose. In such cases, the manufacturer will not accept any liability.
We recommend the settings ‘‘dry-run protection with S-version’’ and
‘‘overflow protection with G-version’’ for high pumping output.
Dismantling and
disassembling
The dismantling or disassembling of a Smartpond® filter plant shall only
be carried out by an authorised Smartpond® retailer or qualified
personnel or with their consent/instructions.
Before opening the terminal box cover, make sure to disconnect the
power cable from the mains!
To Next Page
Loading...