SmartRG SR808ac - Access Control

To Next Page

To Previous Page

SR808ac Cable Modem User Manual

Sets the RTS threshold. Packets exceeding this threshold will cause the AP to

perform an RTS/CTS exchange to reserve the wireless medium before packet

transmission.

5.6.5 Access Control

Choose Wireless > Access Control to display the following page.

This page allows you to control which wireless clients can access your wireless

network. It also provides information about wireless clients connected to your access

point.

MAC Restrict Mode:

Selects whether wireless clients with the specified MAC address are allowed or

denied wireless access. To allow all clients, select Disabled.

MAC Addresses:

A list of wireless client MAC addresses to allow or deny based on the Restrict Mode

setting. Valid input MAC address formats are XX:XX:XX:XX:XX:XX and

XX-XX-XX-XX-XX-XX.

Connected Clients:

A list of connected wireless clients. When a client connects (associates) to the

network, it is added to the list; when a client leaves (disassociates) from the network,