SmartRG SR808ac - Bridging

To Next Page

To Previous Page

SR808ac Cable Modem User Manual

Sets No-Acknowledgement support. Choices are On or Off. When enabled,

acknowledgments for data are not transmitted.

Power Save Support:

Sets Power Save support. Choices are On or Off. When Power Save is enabled, the

AP queues packets for STAs that are in power-save mode. Queued packets are

transmitted when the STA notifies AP that it has left power-save mode.

EDCA AP Parameters:

Specifies the transmit parameters for traffic transmitted from the AP to the STA for the

four Access Categories: Best Effort (AC_BE), Background (AC_BK), Video (AC_VI),

and Voice (AC_VO). Transmit parameters include Contention Window (CWmin and

CWmax), Arbitration Inter Frame Spacing Number (AIFSN), and Transmit Opportunity

Limit (TXOP Limit).

There are also two AP-specific settings: Admission Control and Discard Oldest First.

Admission control specifies if admission control is enforced for the Access Categories.

Discard Oldest First specifies the discard policy for the queues. On discards the

oldest first; Off discards the newest first.

EDCA STA Parameters:

Specifies the transmit parameters for traffic transmitted from the STA to the AP for the

four Access Categories: Best Effort (AC_BE), Background (AC_BK), Video (AC_VI),

and Voice (AC_VO). Transmit parameters include Contention Window (CWmin and

CWmax), Arbitration Inter Frame Spacing Number (AIFSN), and Transmit Opportunity

Limit (TXOP Limit).

5.6.7 Bridging

Choose Wireless > Bridging to display the following page.