SmarTrike Xtend Mg+ - Owners Bicycle Identification Record; Steps to Adjust the Bike to the Rider

X
X
X
X
X
X
X
X
X
X
X
X
X
-3-
Under the body tube
NOTE: This information is available only on the bicycle.
As shown in the image, our bicycle has the production date
code stamped into its body (model / STB / month / year)
3 Steps to Adjust the Bike to the Rider
Owner’s Bicycle Identification Record
1.
2.
3.
Assemble the bike. Make sure the tyres are well inflated.
Riders must have at least 1inch/2.5cm 1 between their crotch and the seat when standing
with feet shoulder-width apart and flat on the ground
Make necessary adjustments to the bike so the rider’s leg-length is at least 2.5cm/1” higher
than the bike's seat 3 .
2
.