8
● Press " ", alarm 1 will be displayed on the screen, press "▲" to turn on or off
alarm 1 and press " " to confirm.
● Then, alarm 2 will be displayed on the screen, press "▲" to turn on or off alarm 2
and press " " to confirm.
● Press " " button.
● Press once to check alarm 1.
● Press twice to check alarm 2.
● Press a third time and the display will return to the current time.
● While the alarm is ringing, touch " " to activate the snooze function. When
the snooze function is activated, " " or " " will keep flashing on the display. The
alarm will ring again after the snooze time.
● When the snooze function is activated, press any button except " " or hold
" " area for 2 seconds to exit the snooze mode.
● If alarm 2 rings during the snooze mode of alarm 1, the snooze function of alarm
1 will automatically be deactivated.
The alarm will ring for 2 minutes and will change 4 times in total during that time.
Pressing any button can stop the alarm tone. Short pressing " " can activate
the snooze function but long pressing " " can stop both the ring and snooze
function. Once turned off, the alarm will repeat at the same time the next day.
● During the alarm setting, double clicking " " or not operating any buttons within 20
seconds will cause the weather station to save the current settings and automatically
return to the normal display.
● The snooze time can be set from 5 ~ 60MIN. It can also be deactivated by setting it to OFF.
● For quick setting of the values, long press "▲" or "▼".
Note:
－ Only pressing "▲" can turn the alarm on/off.
－ When the alarms are activated, " " and " " icons and the alarm cycle icon(M-F, M-S or
S-S) will be displayed on the screen.
－ When the alarms are deactivated, " " or " " with the alarm cycle icon will not appear
on the screen.
Note:
1
1
2
2
8.2 How to Turn on/off the Alarms
8.3 How to Check the Alarms
8.4 Turn off the Alarm Tone
8.5 Snooze Function
1 2
To Next Page
Loading...