15. City Setting for Sunrise & Sunset Time
● The minute of the exit time of night mode will be flashing, press "▲" or "▼" to set
the required minute and press " " to confirm. After completing these steps the
weather station will return to the original display.
● Press " " button once to enter the city selection mode, the city abbr will be
flashing.
● Refer to the chart on appendix 1 on page 19.
● Press "▲" or "▼" button to select the city abbr or number and press " " to
confirm.（for quick setting, long press "▲" or "▼"）
15
● When night mode is on, the icon " " will be displayed on the screen. When reaching the
set night mode entry time, the backlight will automatically get dim according to the set
night mode brightness, and when reaching the set night mode exit time, the backlight will
return to the original brightness.
● When night mode is off, the screen will be on constantly.
● In night mode, the backlight can be switched to the highest brightness for 15 seconds by
touching " ".
● During setup, if you want to exit it, just double click " " and the weather station will
save the current settings and return to the display.
Note:
● If your city is not listed in the chart, please select a neighboring city.
● During the setting, if you want to exit it, double click " " or no operation of buttons
within 20 seconds, the weather station will save the current setting and automatically return
to the normal display.
● For quick setting, long press "▲" or "▼".
Note:
When the city is selected, the sunrise and sunset time will be automatically generated.
To Next Page
Loading...