LIVE VIEW / SNAPSHOT / RECORDING
Tap to take snapshot image(s) of the video.
The captured snapshots will be stored in
your mobile device.
Tap to turn ON/OFF the volume.
Tap to Start/Stop recording. The recorded
video file will be stored in the memory card of
your camera.
Tap and hold the icon to send the voice to
remote device (Push To Talk)
Tap to return to the main page.
The APP allows users to have access to live video. User can take snapshot image(s) and
record the live video.
When you launch the App on the smart phone or tablet, the image displaying on the main
screen is the very last automatically captured snapshot from the live view of the previous
established session. Tap the image to enter live view mode.
The controls and layout of the APP have been customized to meet the operating
system requirements of the mobile device. The main page may vary, depending on your
mobile device. By default, the live view is displayed in portrait mode. You can also turn the
device sideways to switch to landscape mode for a larger view.
Note: Once the recording is started by motion detection or manually, the APP will
continue the recording for 1 minute. User cannot stop the recording during this period.
11
To Next Page
Loading...
Need help?
General
