Envi r onment Mode
The Environment Mode settings allows you to select the power line frequency used at
the location of WAPP camera. The power line frequency varies depending on geographic
region. It may cause image flicker if wrong frequency is selected. Please check with local
authorities for proper setting.
Low Light Enhancement
The Low Light Enhancement Mode is for improving the night view video image by providing 5
levels to select from (5 = brightest).
WI-FI SETTING
The Wi-Fi setting allows you to choose the wireless connection and setup the Wi-Fi
environment.
When you tap the “Manage Wi-Fi network” button, the system automatically scans the
nearby network and shows the available Wi-Fi routers in the drop-down list. Choose
the appropriate Wi-Fi router and enter the Wi-Fi router password if necessary. Due to
security concerns, it is suggested to use the WPA/WPA2/ WPA2-PSK protocol for Wi-Fi
network.
Note:
1. When the Wi-Fi connection is completed and you unplug the Ethernet cable,
the camera will reboot and it will take several minutes to establish the
connection. Please re-launch the APP when you see the green signal indicator
lights up.
2. The WAPP camera is designed to work with the legal Wi-Fi channels in your
region. Please refer to your Wi-Fi router manual to choose an appropriate
channel for WAPP camera.
3. If camera fails to connect to the Wi-Fi router, please hold down reset button
for 2 seconds to reset the system and repeat register process again.
24
To Next Page
Loading...
Need help?
General
