Smartwares 10.021.37 User Manual

ADVANCED SETTING
This chapter explains the advanced settings for administrator. Administrator is the one who
owns the administration password and has the full control to the WAPP camera. The
administrator can access all WAPP functions and settings, while general users can receive the
surveillance images for live view/screen capture/video recording and may not manage the
camera settings.
Admin Password
The security code required to enter Advanced Setting for
system setting management
Email Alert
Enable / Disable receiving E-Mail alert (after system
detecting motion) on your mobile divice. Please make sure
you have setup the E-Mail Setting correctly and have
activated Motion Detection function.
Time Zone
Setup the appropriate time zone
Daylight saving
Turn ON/OFF the daylight saving function.
Device Security Code
The password required for remote access
Video Setting
Configure the video quality and local power frequency
Wi-Fi Setting
Manage your Wi-Fi Network
Sensitivity Setting
Setup the camera sensitivity for motion detection
Email Setting
Setup your email account for E-mail alert
SD Card Format
Format/Setup the SD card
Profile Setting
Save the current camera settings and apply the settings
to other cameras
Device Information
Check the App and API Kernel version
Note: It may take more than one minute for some routers to update the registered
devices. When you complete advanced settings and return to device list, please wait for
a while allowing your router to finish the camera registration.
21

Smartwares 10.021.37 Specifications

General

Brand	Smartwares
Model	10.021.37
Category	IP Camera
Language	English