SAFETY AND INSTALLATION TIPS
Do not attempt to open the units with the power adaptor plug connected to avoid
any risk of personal injury.
When installing CCTV camera(s), always follow manufacturer's advice when
using power tools, steps, ladders, etc. and wear suitable protective equipment
(e.g. safety goggles) when drilling holes. Before drilling holes through walls,
check for hidden electricity cables and water pipes. The use of cable/pipe
detector is advisable.
It is also advisable to avoid exposing any cameras to extreme weather
conditions (e.g., under a gutter which is prone to any water leaks). When
installing any cameras with this unit, it is advisable to use cable conduit to
protect any video/power extension cables from being exposed externally and
to prevent/reduce the chances of the cables being tampered with. After drilling
any hole though an external wall for a cable, ensure the hole is sealed up
around the cable using a sealant to prevent drafts.
To prevent a fire or electrical shock hazard, do not attempt to open the
housing while the unit is exposed to rain, water or wet conditions. There are
no user serviceable parts inside. Refer servicing to qualified service
personnel. Avoid pointing the camera(s) directly at the sun or any bushes, tree
branches or moving objects that might unnecessarily cause the camera to
record
.
To Next Page
Loading...
Need help?
General
