TIME ZONE
The drop-down list shows the world time zone. Select the time zone that will
work the best for you. If your date/time is during the daylight saving time
period, please check the Daylight Saving box to adjust the system time
properly.
DAYLIGHT SAVING
Activate/Deactivate the daylight saving function.
DEVICE SECURITY CODE
The Device Security Code is a specific security code to access the camera. The
default password of the camera is 123456. Please use this function to change
the default password into your personal security code.
1. Type in the old password.
2. Type in the new password and confirm the new password again.
3. Tap OK to save the setting.
Note:
1. Change password in system information page accordingly.
2. If you forget the Device Security Code, please hold down the reset
button (P.8) for 5seconds to reset the system to factory default. All settings will be
restored to factory default. You will need to configure your camera from the start.
VIDEO SETTINGS
This section allows you to configure the video quality and environment
mode.
Video Quality
The Video Quality setting section allows you to adjust the quality of the video
streaming. By selecting better video image will allow you to view high resolution
image. By selecting better streaming will allow the video to display more smoothly
(quality depend on local internet environment).
Only select better image when you have sufficient bandwidth and updated mobile
device(s). Please refer to P.4 for system requirment.
23
To Next Page
Loading...
Need help?
General
