The state of art WAPP camera is capable of deliver high quality Digital High Defi (HD) video to
your smart-mobile device(s), which would require higher internet bandwidth. Due to your
local internet environment condition, your mobile device(s) may display black-screen or
temporary disconnect to the WAPP camera.
* Make sure the WAPP camera is operating with suffi internet bandwidth, 1Mbps (upload/ download
speed) is suggested.
* For best performance, the smart-mobile device(s) need to be on Wi-Fi or 4G mobile network
in order to receive maximum download speed.
* When the internet transmission is low, your WAPP APP will automatically switch to Relay Mode:
‧ By adjusting to “Better Streaming” in the system setting section may improve
the WAPP APP performance.
* Your internet bandwidth is limited. For best performance, try to avoid more than two users
connecting to the WAPP camera simultaneously.
* Make sure your smart-mobile device(s) is equipped with up-to-date technology, 1.5GHz dual core
processor or equivalent is suggested.
* If the signal strength of your Wi-Fi router is weak, there are several ways to improve
transmission:
• Change router/camera relative position to receive better signal.
• Use wire Ethernet cable on the WAPP camera to establish connection between WAPP
camera and your router.
‧ Use Wi-Fi repeater/extender to maximize the service range of your Wi-Fi route.
‧ Switch your router to 11b/11g mode in order to improve router service range.
‧ Purchase extension cable or high gain antenna for your camera from the WAPP
vendor.
* Please make sure the memory card used is CLASS10 rated.
2
To Next Page
Loading...
Need help?
General
