SETUP PIN LOCK
(iOS) (Android)
If you enable PIN Lock, the user will be asked to enter the PIN code when
you launch the APP.
1. Enable the “Enable lock when starting” function. Then enter your PIN code.
2. Confirm your PIN code again.
Note: If you forgot your PIN code, please uninstall the APP and reinstall it on the
mobile device.
NOTIFY (PUSH NOTIFICATION)
The WAPP camera supports motion detection function. When any event is detected in
the camera site, you’ll receive push notification on the mobile devices for the event
recognized by the camera.
For iOS
If you want to enable/disable it, please follow the steps on your iOS mobile device:
1. Launch Settings from your Home screen.
2. Tap Notifications.
3. Scroll down to find “OMGuard HD” APP and tap on it.
4. Switch the toggle to ON/OFF in Notification Center.
Note:
It takes time for the changes to take effect in iOS, normally within 2 hours.
19
To Next Page
Loading...
Need help?
General
