Advanced Setup
39
ensure that users always run the most up-to-date version of the
software.
• ZoneAlarm Pro Security Level
The overhead for communication between the router and Zone
Alarm Pro with Web Filtering on your PCs is very minimal. The
communication packets are small and infrequent. However, if you
do feel it is causing a delay on your network, you have some
control over the frequency the packets are sent to and from
ZoneAlarm Pro and the Wireless Barricade.
On the ZoneAlarm Pro (ZAP) Settings Panel on the Wireless
Barricade, the ZAP Security Level option tells the Wireless
Barricade and ZoneAlarm Pro how often they should
communicate. This communication tells the Wireless Barricade
that ZoneAlarm Pro is still running on the PC.
If you set this option to High Security (Check Frequently), the
exchange will occur at smaller intervals. Though we feel this
should not impact your network performance, you do have the
option to select Medium Security (Check Less Frequently) to
increase the interval.
• Exempt LAN Clients Option
This option allows you to Enable or Disable the creation of a
range of IP addresses for PCs which are non–Windows or
require exemption from this enforcement policy.
Note: This option is set as Disabled by default. When you
select the Enabled radio button in the Exempt LAN
Client Option field, be sure to press the APPLY button.
To Next Page
Loading...
