SMC Networks EZ Switch SMCGS10P-Smart User Manual

C HAPTER 1 | Introduction
Description of Hardware
– 31 –
drain pipes, and other electrostatic conductive devices that lead to the ground,
or if located on the first floor of a building, the ground outside itself.
Figure 5: Grounding Point
RESET BUTTON
If you encounter any switch malfunctions, such as a hang or non-recoverable
error, you might want to reset the switch to its default configuration by pressing
and holding the reset button for more than 10 seconds. The reset button is
located on the front panel.
Figure 6: Reset Button
Grounding Point
Reset Button

SMC Networks EZ Switch SMCGS10P-Smart Specifications

General

Brand	SMC Networks
Model	EZ Switch SMCGS10P-Smart
Category	Network Router
Language	English