SMC Networks EZ Switch SMCGS10P-Smart User Manual

C HAPTER 3 | Installing the Switch
Mounting
– 47 –
DESKTOP OR SHELF MOUNTING
1. Attach the four adhesive feet to the bottom of the first switch.
Figure 17: Attaching the Adhesive Feet
2. Set the device on a flat surface near an AC power source, making sure there
are at least two inches of space on all sides for proper air flow.
3. If installing a single switch only, go to “Connecting to a Power Source” on
page 48.
4. If installing multiple switches, attach four adhesive feet to each one. Place
each device squarely on top of the one below, in any order.

SMC Networks EZ Switch SMCGS10P-Smart Specifications

General

Brand	SMC Networks
Model	EZ Switch SMCGS10P-Smart
Category	Network Router
Language	English