SMC Networks HECR Series Communications Manual

Details of Communication Format
4-7 HECR
4.9 Offset setting (with writing FRAM)
Set offset of each Thermo-con from host. In this command, offset data is memorized into FRAM.
It can be set at every minimum unit of +/-0.01 deg.C.
Host →
STX
38H
Offset
ETX
Check sum
CR
Symbol
10
0
10
-1
10
-2
(H)
(L)
← Thermo-con
ACK
CR
Note) As for symbols, minus is indicated by “-“(=2DH) and plus is indicated by “0”(=30H).
Host →
SOH
UT
STX
38H
Offset
ETX
Check sum
CR
Symbol
10
0
10
-1
10
-2
(H)
(L)
← Thermo-con
ACK
UT
CR
Note) As for symbols, minus is indicated by “-“(=2DH) and plus is indicated by “0”(=30H).

SMC Networks HECR Series Specifications

General

Brand	SMC Networks
Model	HECR Series
Category	Chiller
Language	English