SMC Networks ISE40A User Manual

-44-
No.PS※※-OMM0007-H
■[F97] Copy function
The set values of pressure and functions (except for corrected value of fine adjustment of display value)
can be copied. When the pressure range, output and unit specifications are the same, this function
becomes available. The set value can be copied to up to 10 pressure switches simultaneously.
<Connection>
Connect the pressure switches with the power supply turned off.
Connect the FUNC terminals of the master Pressure switch and the slave Pressure switches, and then
turn on the power supply.
The master pressure switch is the switch from which the setting is to be copied.
The slave Pressure switch is the switch to which the setting is to be copied.
<Operation>
Press the or button of the master Pressure switch in function selection mode to display [F97].
Press the button. Move on to the selection of copy function.
Press the button to set.
Selection of copy function
Press the
or
button to select copy function.

SMC Networks ISE40A Specifications

General

Brand	SMC Networks
Model	ISE40A
Category	Switch
Language	English