SMC Networks ZK2 A Series - Page 43

-42-
No. ZK2-OM01301
(6) One-touch fitting assembly
(Purchasing order is available in units of 10 pieces.)
VVQ1000-51A- C8
(7) Sound absorbing material
(2 pcs. per set)
ZK2-SE2-1-A
(8) DIN rail mounting bracket (2pcs. for end plates U and D)
ZK2-DA4-A
Mounting of DIN rail bracket
1) Mount the DIN rail bracket to each end plate (Note 1).
2) Fix the DIN rail bracket using the mounting screws included in the package (tightening torque 0.35Nm).
3) Mount the bracket to the DIN rail. Refer to Page 17 for installation.
Note 1： The direction of the DIN rail bracket can be changed by loosening the hook.
Port size
C8
ø8 One-touch fitting
N9
ø5/16” One-touch fitting
Mounting screw side comes forward
Longer hook
Set screws included in the
package
End plate D
Set screws included in the package
(included)
Set screws included in the package
(included)
End plate U